trioflyer.blogg.se -

#Download dt4 generator
#Download dt4 update

#Download dt4 update

Update Rate: Each channel is updated every 10 μs.

Debounce: Programmable per channel from 0x00000000 (deactivated) to 0xFFFFFFFF (2^32 * 10µs) (LSB= 10 μs 32-bit resolution).

Programmable by using Upper & Lower thresholds.

HIGH/LOW Differential (Hysteresis): 300 mV min.

From: LSB=100 mV Accuracy: ☓ LSB’s (300 mV) over temp.

Voltage Measurement: User can read input voltage of each channel.

Switching Threshold: Four levels (Upper, Lower, Max High, Max Low ) are programmable from 0 to 60 VDC with 10-bit resolution.

Input Impedance: 1 MΩ (with or without power applied to module).

( 20 μs minimum width will be sensed and reported by the appropriate High–Low or Low-High transition status/interrupt.

Overvoltage Surge Protection: 80 VDC max.

Programmable for either voltage or switch closure sensing.

#Download dt4 generator

Additional Enhanced Output Mode Operation: PWM Output and Pattern Generator Output Enhanced DT4 Functionality Features: Additional Enhanced Input Mode Operation: Pulse Measurements, Transition Timestamps, Transition Counters, Period Measurement and Frequency Measurement.Ability to read I/O voltage and output current for improved diagnostics (indicates if load is connected).Ability to sense broken input connection and if input is shorted to +V or to ground.Built-In-Test runs in background constantly monitoring system health for each channel.Programmable debounce circuitry with selectable time delay eliminates false signals resulting from relay contact bounce.Supports ‘dual turn-on’ (series channel output) applications (for example, dual series ‘key’ missile launch control).Ability to handle high inrush current loads (for example, two #327 incandescent lamps in parallel).Ability to current share*, by connecting multiple outputs in parallel, to sink/source up to 2 A per bank.Programmable for Input (voltage or contact sensing) or Output (current source, sink or push-pull) per channel/bank.24 channels available as inputs or outputs.Additional features of the DT4 (Enhanced Version) are listed below.

These modules can sense broken input connections and whether an input is shorted to +VCC or to ground. The DT4 module (the enhanced version) features 24 programmable channels for either input (voltage or contact sensing with programmable, on-module pull-up/pull down current sources), or output (current source, sink, or push-pull) up to 500 mA per channel from an applied, external 3 – 60 VCC source. DT4 Enhanced 24 Discrete I/O Channels (0 to 60 VDC, 500 mA/Ch.)